Iron-On Process

Written instructions will also be included in your order but in case you lose them, here they are again.

 Please ensure you follow the instructions fully to ensure permanent adhesion of the labels:

ALL CLOTHING MUST BE COMPLETELY DRY - ANY DAMPNESS WILL ADVERSELY AFFECT THE ADHESION 

Set iron to ‘Dry’ mode, temp 130-170 degrees (middle or wool setting)

Holding iron flat, press the name tape in place for 10-15 seconds DO NOT move the iron around.

Allow the garment to cool down.

Repeat steps 2 and 3 again (total of 3 pressings and cooling.)

Use a thin pressing cloth on delicate fabrics.

On stretch fabrics or knitwear either iron the label on to the sewn-in garment label or slightly stretch the fabric under the label before applying iron.

ALTERNATIVELY LABELS MAY BE SEWN IN